Work Sharp WSKTS-KO KNIFE & TOOL SHARPENER User Guide - Manual (Page 11)

11
Extra Coarse
P120
Norton SG
Tool Sharpening
Knife Repair
Belt Name
Grit
Size
What it Sharpens
Uses
Coarse
X65
Norax 65µ
Knife
Shape
Medium
X22
Norax 22µ
Knife
Sharpen
Fine
X4
Norax 4µ
Knife & Scissor
Hone
Extra Fine
6000
SiC 2µ
Gut Hooks
Serrations
15° - 30° in 1° increments. Included (total) edge
angle is 2 x the angle selected. Align desired
angle with the indicator line on top of guide.
Low speed (+/-) is 1200 SFM
Mid speed (+/-) is 2000 SFM
High speed (+/-) is 2800 SFM
SFM = Surface Feet per Minute
Belt Information
• Engineered abrasives are long lasting and should meet your sharpening needs.
• Keep clean for best performance and life.
• 6000 Belt is narrow for improved gut hook sharpening.
• Belt Grits are labeled on backing (µ = micron).
• For reference, belts are equivalent to: X65 (P220) | X22 (P1000) | X4 (P3000)
Knife Sharpening Guide Adjustment
Speed Control Adjustment
Belt discoloration is not an indicator of wear. Engineered belts expose new
abrasive as they break down. Used belts may take extra strokes but will
continue to remove material. These belts will keep going longer than you think.
Keep using them as long as they cut.
Abrasive Belt Wear