Work Sharp WSKTS-KO KNIFE & TOOL SHARPENER User Guide - Manual (Page 24)

24
Installation
Push lock release lever & rotate knife sharpening cassette to remove cassette.
Install Blade Grinding Attachment by aligning the chassis to the keyed ‘on / off’
position then rotate into ‘sharpening position’.
Install Left-Hand Belt Flange Fastener onto drive shaft.
Optional: Use a clamp to secure to work bench
Push in and turn tensioner clockwise to install / uninstall belt.
Use tracking knob to center belt on pulley.
X65
Norax 65µ
Shape
Grit
Size
Use
X22
Norax 22µ
Sharpen
Belt Information:
X4
Norax 4µ
Hone
12000MM
SiC 1µ
Strop
Blade Grinding Attachment
13
Bench
Mount Tabs
Tensioner Assembly
Clamp Lever
Angle Selection
Clamp Knob
Short Center Distance
Long Center Distance
Angle Adjustment
Lever
Tensioner
Assembly Tracking
Knob
Hub Fastener
(Left-Handed Thread)
Reference
Plate
Angle
Indicator
90°
Grind
Plate
For reference, belts are equivalent to: X65 (P220) | X22 (P1000) | X4 (P3000)