Aposonic A-S1604R20A - Manual (Page 47)

- 47 -
 Vol+/- ( / ) (Mouse: )
Press this button to increase/decrease the “number of grids treated as motion”
for the motion detection of this camera.
 SEARCH
(Mouse: )
Press this button to test the motion detection of this camera. The detected
motion will be shown on the screen. Press this button again to stop testing.
 ESC
(Mouse: or Right Click)
Press this button to escape from Motion Detection Setup, and return to Motion
Setup.

Privacy Mask Settings.. – used to setup the privacy mask settings. Press
ENTER in Settings.. to call up Privacy Mask Setup for this camera. The
Privacy Mask Setup is similar to Motion Detection Setup, except that the grayed
area of the camera will be blacked out for live/recorded video.
6.3 Alarm Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to Alarm,
and then press ENTER to call up Alarm Setup display as shown. The Alarm Setup
allows the administrator to define the attributes for each alarm input, and the actions
if it‟s triggered. There are up to 16 alarm inputs which can be connected to the
system.