Aposonic A-S1604R20A User Manual
Page 64
- 64 -
Setup Camera – to enable the user to do Camera Setup if “checked”. Press
ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup Alarm – to enable the user to do Alarm Setup if “checked”. Press
ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup SEQ Display – to enable the user to do SEQ Display Setup if
“checked”. Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck
this item.
Setup Scheduled Record – to enable the user to do Scheduled Record Setup
if “checked”. Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck
this item.
Setup HDD – to enable the user to do HDD Setup if “checked”. Press
ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup Password – to enable the user to do Password Setup if “checked”.
Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup System – to enable the user to do System Setup if “checked”. Press
ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup RS-232/422/485 – to enable the user to do RS-232/422/485 Setup if
“checked”. Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck
this item.
Setup Network – to enable the user to do Network Setup if “checked”.
Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.
Setup Factory Defaults – to enable the user to restore factory defaults to all
setup related configurations if “checked”. Press ENTER
or +/-
(Mouse:
Left click)
to check/uncheck this item.
Software Upgrade – to enable the user to upgrade DVR software if
“checked”. Press ENTER
or +/-
(Mouse: Left click)
to check/uncheck
this item.
Shutdown – to enable the user to shutdown the DVR if “checked”. Press
ENTER
or +/-
(Mouse: Left click)
to check/uncheck this item.