Aposonic A-S1604R20A - Manual (Page 65)

- 65 -
6.8 System Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to System,
and then press ENTER to call up System Setup as shown.
The System Setup allows the administrator to set the system time, time zone, time
synchronization, language, etc.
The general operations are as below:
 ▲▼◄►
(Mouse: Left click)
Press these buttons to select the items.
 ESC
(Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display. If
the Save dialog is shown, press ENTER to exit and save, ESC
(Mouse: Right
Click) to exit without saving. Please note that if the selected language is
changed, the user will be asked to reboot the system for the newly selected
language to take effect.
Following is a brief description for each item and its specific operations:
 Time Zone – press +/- buttons to select the time zone for the system. Please
refer to Appendix B for the time zone table.
 Daylight Saving Time – press ENTER
or +/- to check/uncheck this item. The
default value is set by selecting a different time zone, but the user may
check/uncheck this item if the default setting is checked.