Aposonic A-H2A8D2 - Manual (Page 104)

- 104 -
Alarm In /
Status indicators for alarm inputs (GREEN for normal, RED for alarm) for the
selected DVR.
Alarm Out /
Alarm outputs (GREEN for normal state, RED for triggered state) for the selected
DVR. For Administrator, click on any of these icons to control the corresponding
alarm output from normal to triggered, or from triggered back to normal.
Click on this icon to call up Search-by-time dialog. Please select the time (Year,
Month, Date, Hour, and Minute) and recorded video/audio type (Alarm, Motion,
Video Loss, and Normal) to search for playback. Click on Search button to start the
search of the recorded video/audio. (If it failed, the result will be shown on the title
of the dialog.) Now, you may use the playback buttons to play the recorded
video/audio. If there’s not any camera in playback mode, all cameras will be
searched and played.
A playback slider will be shown at playback for “Search
By Time”.
The operations are similar to DVR local operations, except that the user may
click on the bottom area of the playback slider to drag it to a different location.
Click on this icon to call up Search-by-event dialog. The event logs will be shown
on the screen. Please select the DVR device, event type, and source ID to search for
the event logs. Click on Refresh, Up, or Down to update the event logs. Click on
the desired event log to highlight and select it. Click on the
OK button to search the
recorded video/audio for the highlighted event log. Now, you may use the playback
buttons to play the recorded video/audio.
Click on this icon to call up search-PC-video dialog. Please select the
file(s) , and