Aposonic A-H2A8D2 - Manual (Page 48)

- 48 -
for the motion detection of this camera.
SEARCH (Mouse: )
Press this button to test the motion detection of this camera. The detected
motion will be shown on the screen. Press this button again to stop testing.
ESC (Mouse: or Right Click)
Press this button to escape from Motion Detection Setup, and return to Motion
Setup.
Privacy Mask Settings.. – used to setup the privacy mask settings. Press
ENTER in Settings.. to call up Privacy Mask Setup for this camera. The
Privacy Mask Setup is similar to Motion Detection Setup, except that the grayed
area of the camera will be blacked out for live/recorded video.
6.3 Alarm Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to Alarm,
and then press
ENTER to call up Alarm Setup display as shown. The Alarm Setup
allows the administrator to define the attributes for Panic, Alarm Set/Unset, and
each alarm input, and the actions if it’s triggered. There are up to 16 alarm inputs
which can be connected to the system. When Panic is triggered, all the cameras
will be recording at their highest possible frame rates. When alarm is set,
alarm and motion will be detected based on schedule setup. When alarm is
unset, alarm and motion will not be detected.