Aquametrix SLT-5 Ultrasonic Flow & Level Monitor - Manual

• Displays, transmits, to-
talizes and controls
• User friendly, 5 Key Programmer
• False Echo Rejection
• Isolated 4-20 mA output2
• 2 Programmable control relays
• Optional data logger
• Automatic temperature compensation
• Watertight, dust-tight NEMA 4X
(IP66) polycarbonate enclosure
• Sensor ranges from 8
inches to 52 feet
• Easy set up with pre-programmed
sizes for weirs, flumes, and tanks
Greyline SLT 5.0
Non-Contacting Level & Flow Monitor
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
• Waste water flow accumulation
• Water Treatment systems
• Sumps and Pump Stations
• Tank inventory and level monitoring
• Process flow control
• Flow through weirs and flumes
Description
Features
Applications
Use this versatile instrument to continuously measure, display, transmit and
control liquid level in storage tanks and pumping stations, or to monitor and
totalize Open Channel Flow through any flume or weir. Mount the non-contact-
ing ultrasonic sensor above the liquid being measured and install the water-
tight electronics enclosure nearby. Features a user-friendly keypad calibration
system, backlit LCD display, an isolated 4-20mA output and 2 programmable
control relays
Calibration is easy with the built-in 5 button keypad. The SLT 5.0 offers simple
menu selection of measurement units (gallons, liters etc.), calculates volume in
horizontal round tanks, or flow rate (and total) through any flume or weir.
For hazardous locations, the ultrasonic sensor is rated Intrinsically Safe with
an optional safety barrier. The standard PVC and Teflon Sensor is rated for
measurement ranges up to 32 ft/10 m, or select optional sensors for flange-
mount or applications requiring longer measurement range. Options include 4
additional control relays (6 total) and a built-in 2-million point Data Logger with
USB output to Flash memory sticks.
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix