Axxess Interface ASWC - Manual (Page 19)

19
C. Button Assignment (remapping/manual programming)
ASWC Ledgend
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Prev
5. Source/Mode
6. Mute
7. Preset Up
8. Preset Down
9. Power 10. Band
11. Play/Enter
12. PTT (Push To Talk)
13. On Hook
14. Off Hook
15. Fan Up
16. Fan Down
17. Temp Up
18. Temp Down
Note: Not all radios will have all of these commands. Please refer to the
radio owner’s manual or contact the radio vendor directly for specific
commands recognized by that particular radio.
If the next function on the list is not on the steering wheel press the
“Volume Up” button for 1 second, until the LED comes on, then release the
button. This tells the ASWC that the function is not available will move on
to the next function.
*Note (section B): If the ASWC flashes 7 times and you do not have an
Alpine radio connected to it that means that the ASWC did not see any
radio connected. Verify the 3.5 mm connector is connected to the SWC
input on the radio.