Fire-Lite LED-10 Series Remote Fire Annunciator - Manual (Page 5)

5
Document 50400 Rev B 10/27/97 P/N 50400:B
LED-10 only:
• Function switches for:
ü Acknowledge ü Signal Silence ü Drill ü System Reset
• Enable/Disable key-switch for function switches.
• DIP switches control local functions such as piezo enable/disable, function
switches and key-switch enable/disable.
ROM
Piezo Sounder
The LED-10 Series sounder, if enabled, will be activated
when any new alarm or trouble is received from the
panel. It is silenced by pressing an ACKNOWLEDGE or
SILENCE switch. Piezo must not be disabled without
approval of LAHJ (Local Authority Having Jurisdiction).
Membrane Connectors
Membrane switch connectors
Receive-Transmit/Receive only
not used
LED-10 Series Address
Key-switch Enable/Disable for LED-10 Only
(not used on the LED-10L or LED-10LS2)
Piezo Enable/Disable
Top view
Note: TB1 & TB2 are
located on backside of PCB
Figure 1-1: Component Summary