Acer Film Scanner User Manual
Page 14
English
4
Rear Panel
Ventilation holes
These holes are used to ventilate the heat from inside of the film
scanner. Do not block these holes when the film scanner is in use.
SCSI ID selector
You can use the SCSI ID selector to select the SCSI ID of your film
scanner. Please refer to Chapter 5 for more guidelines on how to
determine the SCSI ID number of your film scanner.
Power cord receptacle
Connect the power cord here. When you use the film scanner, make
sure that the power cord is connected securely to the power cord
receptacle.
SCSI IN connector
This is a 25-pin SCSI connector. Use this connector to connect to your
host system with the SCSI cable supplied.
SCSI IN
SCSI OUT
ID
Ventilation
holes
SCSI IN connector
SCSI OUT connector
Power cord
receptacle
SCSI ID
selector