Acer Film Scanner - Manual (Page 23)

English
13
To use SCAN button:
Push the SCAN button on the film scanner front panel. A dialogue box
will pop up on the screen asking you to choose an image editing
software to use. Choose the application you want to use and then click
OK.
Note: if you have only one image editing software installed in your
computer, this dialogue box will be skipped.
The application you choose will be activated. Meanwhile, MiraPhoto
will start to preview the original.
To preview manually:
(1) Open your image editing application software.
(2) From “File” menu, choose “Scanner”, “Select source” or “Select
TWAIN_32 source” to select MiraPhoto as the TWAIN image source.
(This differs according to the application you use)
(3) Choose “Scan”, “Acquire” or “TWAIN_32 source” (this also differs
according to the application you use), MiraPhoto will pop up on the
screen. Click “Preview” to preview the original.
According to the original you scan, choose an appropriate image type
from the “Image Type” drop-down listbox in MiraPhoto. Specify a
scanning resolution in the “Resolution” drop-down listbox and adjust
the size and position of the dotted rectangle in the Preview Area to
specify a scan area. Click "Scan" to start scanning the original.
Step 4. Edit
When scanning has completed, MiraPhoto will import the images into
your image editing software. You can now close MiraPhoto and begin
editing or saving the image.