Acer Film Scanner - Manual (Page 68)

English
58
If you find that your ScanWit film scanner uses the same SCSI ID number
with another SCSI device, you must either change the SCSI ID number of
your scanner or that of the other SCSI device.
To change the SCSI ID number of your ScanWit film scanner:
1. Turn off the power of your computer and ScanWit film scanner.
2. Locate the SCSI ID selector on the rear panel of the ScanWit film
scanner, and push the + or – button on the selector to change the
SCSI ID to an unused number.
3. The new SCSI ID number will take effect the next time you turn on the
film scanner.
6.2 FAQ
If there is one third-party SCSI interface card installed in the
computer, is it all right to hook the scanner to it?
Answer: since the scanner and the driver program both support ASPI-
compatible SCSI cards, it is alright to use a third-party SCSI interface card
as long as it is also ASPI-compatible. However, for best compatibility and
stability with your scanner, we recommend that you use the SCSI card that
comes with your scanner.