SilentKnight VisorAlarm Plus 2U - Manual (Page 17)

3. Operating with Automation Software
When the VisorALARM PLUS 2U receiver operates with an Automation Software connected through
the serial AUT port, the signals are automatically sent to the Automation Software for
acknowledgement. Signals are also stored in the signal database for further review and the ACK and
TRB LEDs still indicate alarm signals and trouble signals pending to restore.
While operating in this mode signals are displayed for a short time in the LCD display but the operator
does not have to manually acknowledge any of the displayed signals.
VisorALARM PLUS 2U Operating
III - 15
Doc.DM375-I
Ver.2.0