SilentKnight VisorAlarm Plus 2U - Manual (Page 21)

AC Loss AC loss has been detected through one of the
inputs
Low system battery Low system battery has been detected through one
of the inputs.
System Trouble signals are displayed by default like any other signal, but when the user
selects the extended info using the OK key the info shown includes a textual description of the
trouble as in the figure:
E 11/16/06 02:10:11
Hdw failure: Printer
This view shows if the signal is an Event (E) or a Restore (R), the date and time of the signal
and the description.
3. Search signals for a specific account:
In this case signals are filtered in order to display only the unrestored signals for one particular
account. When the option “By account” is selected the receiver prompts the user for an
account code:
ACCOUNT SIGNALS
Accn No.:_
The user must introduce the account code using the numeric keys for numbers and using the
following combination of keys for alpha digits:
Alpha digit Keys
A * 0
B * 1
C * 2
D * 3
E * 4
F * 5
The left arrow key (e) has the “Clear” function to delete previous digits and the ACK key
clears all the digits.
When the account code is completed the user must press the OK key to validate the code. As
for previous signal lists, the list can be navigated using the e and f keys. Use the left arrow
to go to a newer signal and the right one to go to an older one.
4. Search “Unrestored” signals.
The “Unrestored” option displays the received signals for which an Event (E qualifier) has
been received but where the Restore signal (R qualifier) has not been received as yet.
Signals stay in this list until the corresponding restore is received and the list is navigated as
described in previous paragraphs.
VisorALARM PLUS 2U Operating
III - 19
Doc.DM375-I
Ver.2.0