SilentKnight VisorAlarm Plus 2U - Manual (Page 19)

5. Accessing the Signal History Log
The receiver includes a Signal History Log that tracks every received signal. This log is stored in non-
volatile memory and is preserved when power supply is lost. This Signal History Log can be accessed
for review by selecting the “Signal Database” option found in the USER MODE root menu.
The “SIGNAL DATABASE” menu is shown in the LCD display as seen in the next figure:
SIGNAL DATABASE »
{All} Sys Troubles By
The set of available options included in the “SIGNAL DATABASE” menu is shown in the next
figure:
The first five options represent different search criteria for unrestored signals which can be used in the
Signal History Register. The option “Info” will display the total number of stored signals and the
percentage of occupation.
24027 Signals stored
„„„„„„„ 42%
The “Stats” option summarizes the number of unrestored and unconfirmed signals in the system.
3038 Unrestored
0 Unacknowledged
The “Clear” option is available only for Managers and it deletes all the content of the signal history
log. Please use this option only if you are fully aware and understand its reach and consequences.
Signals can be reviewed using four different search filters:
1. Search “All” signals.
VisorALARM PLUS 2U Operating
III - 17
Doc.DM375-I
Ver.2.0