How to trigger on the lin bus decoder – GW Instek GDS-2000A series CAN/LIN bus User Manual User Manual
Page 13
Advertising
HOW TO USE THE SOFTWARE
11
How to Trigger on the LIN Bus Decoder
Step
1. Press the Trigger Menu key on the
front panel.
2. Press the Type button from the
bottom menu.
3. Press the Others button from the
side menu and then select Bus
using the Variable knob and Select
key.
Up
Down
4. Press the Trigger On button from
the lower menu and then select the
desired Trigger ON condition
using the Variable knob and Select
key.
Advertising