How to trigger on the can bus decoder – GW Instek GDS-2000A series CAN/LIN bus User Manual User Manual
Page 9
Advertising
CAN/ LIN Bus Decoder App User Manual
7
How to Trigger on the CAN Bus Decoder
Step
1. Press the Trigger Menu key on the
front panel.
2. Press the Type button from the
bottom menu.
3. Press the Others button from the
side menu and then select the Bus
using the Variable knob and Select
key.
Up
Down
4. Press the Trigger On button from
the lower menu and then select the
desired Trigger ON condition
using the Variable knob and Select
key.
Advertising