Nstall the software – GW Instek GDS-2000A series CAN/LIN bus User Manual User Manual
Page 4
Advertising
CAN/ LIN Bus Decoder App User Manual
2
I
NSTALL THE SOFTWARE
Step
1. Make sure the optional module
“DS2-8LA” or “DS2-16LA” is
installed in the GDS-2000A.
2. Make sure firmware version is
V1.18 or higher.
3. Insert the USB memory stick with
the CAN_LinBus.gz into the USB
port on the front panel.
4. Press the Utility key.
5. Select File Utilities from the bottom
menu.
Advertising