HT instruments HT157 User Manual
Page 43
HT155 - HT157
EN - 41
7.1.1. RECALLING THE STATISTIC ANALYSIS DATA ON THE DISPLAY
1. Select a datum corresponding to the “STA” indication available in the list of saved
measures and press “
”. The instrument displays the following screen:
Line 1
Line 2
Line 3
Line 4
Lines 5-10
Fig. 41: Numerical display of "STA" analysis data
Line 1
This line shows the measure name defined in the programming menu
(see § 4.6)
Line 2
This line shows the date/time when measurement was started
Line 3
This line shows the type of “STA” measurement and the measuring time
defined in the programming menu (see § 4.6)
Line 4
This line shows the measuring range selected before starting measuring
Lines 5-10
These lines show the numerical values measured by the instrument
2. Press the “
” key to view the graphic trend of the statistic analysis and “
” again to
view the cumulative values of distribution
Fig. 42: Graphic display of "STA" analysis values
3. By using the “ ” or “ ” keys, it is possible to move the cursor on the x-axis, scrolling the
values within the selected measuring range
4. Press the “
” key again to go back to numerical display or the “ ” key to go back to the
initial screen