HT instruments HT157 - Manual (Page 51)

HT155 - HT157
EN - 49
8. OPERATIONS WITH SOUNDVIEW SOFTWARE
8.1. FOREWORD
The SoundView Windows software provided with the instrument allows carrying out the
following operations:
 Downloading the data of the recordings carried out with the instrument connected to the
PC via USB interface
 Read and analyze the saved data and customize them into PC folders with names
defined by the user, which is not possible by operating directly on the instrument itself
 Define, in a simple way, the names of the measurements and send them directly to the
instrument
 Display the data of the analyses in numerical and graphic format
 Download the results of the calibration operations carried out on the instrument
 Export the data of the recordings in Excel file format
 Copy and print directly the data downloaded by the instrument to PC
8.2. MINIMUM
SYSTEM REQUIREMENTS
The following characteristics are necessary for a correct installation and use of the
software
 Processor Pentium III 500MHz or higher
 RAM memory: 128Mbytes
 100Mbytes of free space available on HD
 Operating system Windows 2k or higher
8.3.
INSTALLING THE DRIVER USB
When connecting the instrument to the PC for the first time via an USB port of the PC, it is
necessary to install the USB driver, so that the instrument can be recognized. To this
purpose, proceed as follows (e.g.: Windows XP operating system):
1. Turn on the instrument in any screen
2. Connect the instrument to an USB port of the PC by means of the supplied cable
3. The PC shows the following screen:
4. Select the option “Install from list or specific location” in order to select the driver from a
specific folder and click on the “Next” key. The PC shows the following screen: