HT instruments HT3320 - Manual (Page 11)

HT3320
EN - 10
5.4. FONT COLOR SETTING
In this section it is possible to set the color of the font shown on the instrument’s display
1. Use the arrow keys
S or T to select the desired color, choosing among the available
options: Orange, Green, Black, Blue, Gold and Purple (see Fig. 7)
2. Press the ESC key to save and exit the function
Fig. 7: Font color selection
5.5. CURSOR SHAPE SETTING
In this section it is possible to set the shape of the central cursor (if required) associated
with the IR sensor
1. Use the arrow keys
S or T to select the options: Off (no cursor), Cross, Circle (see
Fig. 8)
2. Press the ESC key to save and exit the function
Fig. 8: Selection of measuring cursor shape
5.6. BACKLIGHT BRIGHTNESS PERCENTAGE SETTING
In this section it is possible to set the brightness percentage of the display’s backlight
1. Use the arrow keys
S or T to select the options from 30% (minimum brightness) to
100% (maximum brightness) (see Fig. 9)
2. Press the ESC key to save and exit the function
Fig. 9: Backlight percentage selection