In-Situ Con TROLL PRO Installation Manual (purchased after 10 May 2012) - Manual (Page 7)

7
Box Contents
Remove the controller from the shipping box. The shipping box should contain the
following items.
l
Controller (1)
l
Controller plugs (5)
l
Dome connectors (3)
l
O-rings (6)
l
Large lock nuts (6)
l
Sealed desiccant pack (1) that will be placed in the installed controller.
l
Opened desiccant pack (1) that protected the instrument during shipping. Discard
after opening the controller.
After verifying that the contents of the box are complete, place
the controller back in the box for transport to the installation site.
Figure 2.1 Internal view of DC model
Figure 2.2 Internal view of AC model