Figure 15), Mallet (figure 16). t – In-Situ Con TROLL PRO Installation Manual (purchased before 10 May 2012) User Manual
Page 15
Advertising
Mounting the Controller
15
5. Thread sensor or electrical cables through the dome connectors for later wiring
by a qualified electrical technician. Tighten to approximately 15 in-lbs of torque.
FIGURE 15. Controller box hardware
FIGURE 16. Attached port plug (left) and attached dome connector (right)
Large o-ring
Lock nut
Port plug
Dome connector
Large o-ring
Lock nut
Port plug
Large o-ring
Lock nut
Dome connector
Advertising
This manual is related to the following products: