In-Situ Con TROLL PRO Operators Manual (purchased before 10 May 2012) - Manual (Page 29)

Logged Data 29
5.2.4 Connecting the Con TROLL PRO to Win-Situ ® 5 Software
1. Install Win-Situ 5 from the In-Situ software CD. Open Win-Situ 5.
2. In the Win-Situ 5 menu bar, select Preferences, then Comm Settings.
3. Make sure that the communication settings are set as follows:
4. Click the Connect button . The “Home” screen will appear. It will
display the ambient temperature and barometric pressure measured by the Con
TROLL PRO device. The software will also create a “log” file using the serial
number of your Con TROLL PRO device.
5. Click the Logging tab.
This is the
COM port
for the
Bluetooth
USB
adapter
Use this
mode
Connect
button