Jenway Genova Nano German - Manual (Page 71)

SECTION 15 – Protein
The protein measurement mode allows the user to select a method from a list of common protein assays,
including Pierce 660, BCA, Bradford, Lowry, Biuret and Direct UV
15.1 PROTEIN MENU OPTIONS
The protein menu allows the user to select the required
pre-defined method from the list of on-screen options by
pressing the key adjacent to the measurement method that
is required. The Pierce 660, BCA, Bradford, Lowry, Biuret
options allow the user to construct a calibration curve that
can be used to quantify the protein content of a sample.
The direct UV method uses the absorbance values at 280
and 260nm to estimate the protein content of a sample
according to a standard formula.
15.2 PIERCE 660 ASSAY
The Pierce 660 operating menu enables the user to perform
the Pierce 660 protein assay at the specified wavelength of
660nm.
The Pierce 660 settings menu allows the user to adjust
measurement specific parameters such as the number of
standards and result resolution. Other method settings can
be altered if required, but the Pierce 660 method settings
are locked and any changes will be lost after exiting the
mode. See Section 8 for full instructions on altering the
Pierce 660 menu options, settings and creating a new
standard curve.
15.3 BCA ASSAY
The BCA operating menu enables the user to perform the
BCA protein assay at the specified wavelength of 562nm.
Menu Options
Operating Menu
Operating Menu
69