Jenway Genova Nano German - Manual (Page 83)

17.3 DELETING METHODS
In the operating menu press the key adjacent to the
method icon to open the method selection menu and use
the keys adjacent to the arrow icons to move page up or
down. Select the method to be deleted by pressing the key
adjacent to the method location and press the key below
the delete icon.
Confirmation will be needed to delete the selected method;
press the key adjacent to the tick icon to confirm deletion.
Press the key adjacent to the cross icon to cancel deletion
and return to the method selection menu.
17.4 SAVING RESULTS
Results can only be saved if there is a valid USB memory stick inserted into the front of the instrument.
The instruments are supplied with a USB memory stick but other types which may be used include: the
PNY Attache Premium, the Emtec C250, The Kingston Data Traveler G2, the Sony Pocket Bit and the
Integral Flexi.
In the operating menu press the key adjacent to the USB
memory stick icon to open the results selection menu.
If the USB memory stick doesn’t have any results stored
on it only the save icon will be displayed. To save a result
press the key below the save icon. This will open the results
naming menu.
The default result name will be displayed. To save the
result under the default name press the key adjacent to
the tick icon. To change the name of the result press the
key below the eraser icon. One press of the key will delete
one letter, holding the key for 2 seconds will delete the
name completely.
To select letters use the keys adjacent to the arrow icons to move around the menu. Once the required
letter is highlighted press the key below the pencil icon to select the letter. Up to eight characters can be
selected. To use numbers in the results name press the key below the AB icon. Repeat pressing of this
key will cycle between upper case and numbers. Once the required name for the result has been entered
press the key adjacent to the tick icon to save and return to the results selection menu.
81