Adobe AUDITION 1.5 User Manual
Page 195
187
ADOBE AUDITION 1.5
User Guide
When you click Serial or Parallel in the FX mixer, mix settings automatically change to
achieve the results above. For serial groups, effect inputs are set to 0% of the dry source
(specified in the Src text box) and 100% of the previous effect (specified in the Prv text
box). Likewise, all effect output sliders are set to zero except for the final slider, which is
set to 100%. For parallel groups, effect inputs are set to 100% of the dry source and 0% of
the previous effect, while effect output sliders are set to an equal level (33% each for three
effects, 25% each for four effects, and so on).
Note: The first effect in the FX mixer lacks Src and Prv text boxes because no previous effect exists.
FX mixer
To mix real-time effects:
1
In the track controls, right-click the FX button, and choose FX Mixer.
2
Do any of the following:
•
To change the ratio of dry to wet sound that the track outputs, move the Dry Out slider
and the effects sliders.
•
To bypass an effect, click Bypass.
•
To combine effects in serial or parallel groups, click either Serial or Parallel.
ug.book Page 187 Tuesday, March 16, 2004 1:29 PM