Adobe AUDITION 1.5 - Manual (Page 28)

CHAPTER 1 20
Looking at the Work Area
You can also use the wheel on your mouse to scroll in the display window. To do so, place
the pointer over the display window, and roll the mouse wheel.
To change the position of the horizontal scroll bar:
Right-click the horizontal scroll bar, and choose a display option: Above Display or Below
Display.
Using the selection and view controls
The Selection/View Controls window shows the beginning and ending points, as well as
the total length of both the selection and the section of the waveform or session that’s
currently visible. Both the selection and display range is shown in the current time-display
format. For information on changing the time-display format, see “Monitoring time” on
page 69.
In addition to viewing time information, you can also use the selection and view controls
to adjust selections and change the section of audio data that is visible in the display
window. Simply enter new values for Begin, End, and Length. After you click in a text box,
you can right-click to access additional context-menu commands.
Selection and view controls
To display the selection and view controls:
Do one of the following:
• Choose Window > Selection/View Controls. A check mark indicates that the window is
showing.
• Click the Hide/Show Selection/View Controls button in the View toolbar. (See
“Using toolbars” on page 13.)
If you don’t like the default location of the selection and view controls, you can reposition
them or detach them so they float above the main window. (See “Using windows” on
page 14.)
ug.book Page 20 Tuesday, March 16, 2004 1:29 PM