Adobe AUDITION 1.5 - Manual (Page 200)

CHAPTER 7 192
Mixing Multitrack Sessions
To use the Track Mixer:
1 In Multitrack View, choose Window > Mixer.
2 Click the Track Mixer tab, and set the following options:
Control display buttons Lets you customize the appearance of the Tracks Mixer. Each of
the six buttons—Out, Bus, FX, EQ, Pan, and M/S—displays a different track control.
• Out shows and hides the Out buttons.
• Bus shows and hides the Wet and Dry text boxes for buses.
• FX shows and hides the FX and Lock buttons.
• EQ shows and hides the three equalization text boxes (H, M, L).
• Pan shows and hides the Pan controls.
• M/S: Shows and hides the Mute and Solo buttons.
Out 1 Opens the Adobe Audition Playback Devices window, which lets you assign the
output properties for the selected track. The button’s label changes to reflect the output
device (for example, Device 2 or Bus C).
Wet and Dry text boxes Control the ratio of processed to original signal that tracks output
to buses. To change these values, either enter a value or drag across the text boxes. (You
can also change these values on the Bus tab of the track controls.)
To output a track to a bus, see “Specifying track input and output devices” on page 181.
FX Opens either the Effects Rack (if the track doesn’t yet have an effect assigned to it,
regardless of what effects may be assigned if the track is part of a bus) or the dialog box for
whatever effect is assigned to the track.
ug.book Page 192 Tuesday, March 16, 2004 1:29 PM