KROHNE OPTIWAVE 7300C Quickstart EN - Manual (Page 20)

2
INSTALLATION
20
OPTIWAVE 7300 C
www.krohne.com 03/2014 - 4000050005 - QS OPTIWAVE 7300 R08 en
2.9.6 How to attach the weather protection to the device
Equipment needed:
• Device.
• Weather protection (option).
• 10 mm wrench (not supplied).
The overall dimensions of the weather protection are in "Dimensions and weight" in the
handbook.
• Loosen the bracket nuts on the weather protection.
• Remove the bracket.
• Lower the weather protection onto the device.
• Turn the weather protection so that the keyhole points forward.
• Attach the bracket.
• Lift the weather protection to the top of the housing support pillar.
• Hold the weather protection in the correct position and tighten the bracket nuts.
Figure 2-24: Installation of the weather protection