KROHNE MFC 400 FOUNDATION FIELDBUS - Manual (Page 41)

OPERATION
4
41
MFC 400
www.krohne.com 11/2013 - 4003221901 - AD MFC 400 FF R01 en
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
Depends on the
type, the device is
calibrated for
Temperature units: Temperature units: Temperature units: Temperature units:
K; °C; °F
Mass flow units: Mass flow units: Mass flow units: Mass flow units:
kg/s; kg/min; kg/h; kg/d; t/s; t/min; t/h; t/d; g/s; g/min; g/h;
g/d; lb/s; lb/min; lb/h; lb/d; klb(US)/s; klb(US)/min; klb(US)/h;
klb(US)/d; STon/s; STon/min; STon/h; STon/d; LTon/s;
LTon/min; LTon/h; LTon/d
Density units: Density units: Density units: Density units:
kg/m³ / kg/dm³ / kg/L / g/m³ / g/L / g/cm³ / g/ml / Mg/m³ /
t/m³ / lb/in³ / lb/ft³ / lb/gal / lb/ImpGal
Volume flow units: Volume flow units: Volume flow units: Volume flow units:
m³/s; m³/min; m³/h; m³/d; L/s; L/min; L/h; L/d; kL/s; kL/min;
kL/h; kL/d; mL/min; CFS; CFM; CFH; ft³/d; kCFS; kCFM;
kCFH; kft³/d; cm³/s; cm³/min; cm³/h; cm³/d; gal/s; GPM;
gal/h; gal/d; kgal/s; kgal/min; kgal/h; kgal/d; bbl/s; bbl/min;
bbl/h; bbl/d; ImpGal/s; ImpGal/min; ImpGal/h; ImpGal/d
Speed (velocity) units: Speed (velocity) units: Speed (velocity) units: Speed (velocity) units:
m/s; mm/s; m/h; km/h; in/s; ft/s; yd/s; in/min; ft/min; yd/min;
in/h; ft/h; yd/h
Concentration units: Concentration units: Concentration units: Concentration units:
% / degAPI / degPlato / degBrix / Baume 144 / Baume 145 /
% NaOH / % mass A / % mass B / % mass / % vol A / % vol B /
% vol / % alc by mass / % alc by vol
Units for Drive Level, Sensor Average, Sensor Deviation, 2 Units for Drive Level, Sensor Average, Sensor Deviation, 2 Units for Drive Level, Sensor Average, Sensor Deviation, 2 Units for Drive Level, Sensor Average, Sensor Deviation, 2
Phase Signal: Phase Signal: Phase Signal: Phase Signal:
%
Frequency units: Frequency units: Frequency units: Frequency units:
Hz
Strain units: Strain units: Strain units: Strain units:
Ohm
DECIMAL
Decimal
R/W The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
0
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value