KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 55)

TECHNICAL DATA
8
55
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
Display and user interface Display and user interface Display and user interface Display and user interface
Display None
Measuring accuracy
Accuracy ± 10 mm / 0.4¨ (when density is constant)
Operating conditions
Temperature Temperature Temperature Temperature
Operating temperature,
transmitter module
-40…+85°C / -40…+185°F, if there is insulation around the
measuring chamber, specify the temperature in the order. Do not put
insulation around the transmitter housing.
Pressure Pressure Pressure Pressure
Operating pressure Atmospheric pressure
Other conditions Other conditions Other conditions Other conditions
Protection category Transmitter housing without LCD indicator: IP 54
Transmitter housing with LCD indicator: IP 66
Installation conditions
Notes The analog transmitter is calibrated at the factory and attached to the
measuring chamber before delivery
Dimensions and weight Refer to the "Technical data: Dimensions and weights" section
Materials
Housing Polyester-coated aluminium
Reed-chain tube Stainless steel
Clamp Stainless steel
Electrical connections
Power supply Power supply Power supply Power supply
Voltage Non-Ex: Non-Ex: Non-Ex: Non-Ex:
9...32 VDC
Ex ia: Ex ia: Ex ia: Ex ia:
Refer to supplementary instructions or approval certificates
Cable entry M20 × 1.5
Intrinsically-safe circuit data for
Ex ia-approved devices
Refer to supplementary instructions or approval certificates
PROFIBUS PA PROFIBUS PA PROFIBUS PA PROFIBUS PA
Description - PROFIBUS PA protocol Profile
A&B, ver.3.0 (EN 50170 vol.2)
FOUNDATION Fieldbus FOUNDATION Fieldbus FOUNDATION Fieldbus FOUNDATION Fieldbus
Description FOUNDATION Fieldbus protocol -
Module output FOUNDATION™ Fieldbus PROFIBUS PA
Order code xF45xDxxxxx (PR) xF45xXxxxxx (PR)