Technical data, 5 basic version: dimensions and weights – KROHNE BM 26 BASIC_ADVANCED EN User Manual
Page 58
8
TECHNICAL DATA
58
BM 26 BASIC/ADVANCED
www.krohne.com
10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
8.5 Basic version: Dimensions and weights
Note:
Note:
Note:
Note:
• C-C = Centre-to-centre length (process connections)
• ML = Measuring length
• L = Overall length
• a = Distance from the axis of the bottom connection to the bottom of the device;
b = Distance from the axis of the top connection to the top of the device
Basic version: Lateral / Lateral process connections
Figure 8-2: Lateral / Lateral process connections
1 Optional vent with 3/8 NPT connection (with plug). Optional drain with 3/8 NPT - or a 1¼ NPT plug for removal of the
float from the bottom of the device
2 Welded cap
3 Optional limit switch
4 Flange connection
5 Optional long stud (½¨ or ¾¨) connection
6 Optional male thread (½... ¾ NPT or G ½...¾) connection
7 Level indicator with optional scale
8 Level indicator without optional scale
c