Agilent Technologies 82357B - Manual (Page 12)

82357B USB/GPIB Interface
4 Configuring the 82357B
6 82357B Quick Start Guide
4 Configuring the 82357B
Observe the Agilent Connection Expert
Run the Agilent Connection Expert to verify your I/O
configuration: In the Windows taskbar notification area, click
the IO icon, then click Agilent Connection Expert.
When the main screen appears, you will see a map of the
system connections in the Instrument I/O on this PC pane
(also called the “Explorer Pane”). At this time, the Connection
Expert window should refresh. If it does not refresh
automatically, click Refresh All. The 82357B will appear in the
Connection Expert explorer as a USB/GPIB interface as shown
below.
Configure the 82357B
Once you see the 82357B displayed in the Connection Expert,
this means that it has been configured and can be used for
programming. At this time, only the green READY LED should
remain illuminated. To edit the configuration settings, click
Change Properties... in the detail pane on the right side of the
window.
N O T E
See Chapter 2, “Using the Agilent 82357B” in the 82357B
User's Guide for more information on how to set the configura-
tion parameters.