KYORITSU 3126 - Manual (Page 26)

̶ 24 ̶
8．Accessories
8-1 Metal parts for Line Probe, and replacement
# DANGER
In the electrical environment of CAT.II or higher, MODEL8252
should be attached and used with the test lead. With the large
exposed metal parts of MODEL8254 and 8019, the equipment
under test may be shorted. It may result in failure of the equipment
under test and cause fire or lead to fatal or serious injury.
(1) Tip metal parts
MODEL8252: Standard Prod (straight type, with molded parts)
MODEL8254: Straight Type Prod
MODEL8019: Pickel Type Prod
To be used to hook the instrument.
(2) How to replace it
Turn the Line probe counterclockwise to remove the attached tip
metal. Put the tip metal you want to use to the hexagon socket
and turn it to clockwise together with the tip of probe, and tight
up screws.
MODEL8252
Male Screw
MODEL8019
MODEL8254
Hexagon Socket