KYORITSU 4106 User Manual
Page 26
22
Following message appears and shows that the data cannot be saved when
the “
” Key is pressed with above display.
Note) Following message appears and shows that the data cannot be
saved when trying to save Rk at 200kΩ or upper Ranges. The Rk
values saved at 2Ω and 20Ω Ranges are kept effective at 200kΩ or
upper Ranges.
Note) Following message appears and shows that the data cannot be
saved when trying to save Rk at Wire (ρ) measurements.
8-3 Backlight
To facilitate working in dimly lit situations or in night time, a backlight
function is provided which illuminates the LCD. Press the “
” Key to
operate this function. The backlight will light up for about 30 sec and turned
off automatically. Pressing the “
” Key while the backlight is on can
turn it off by manual.
8-4 Auto-Power-Off
This instrument is automatically powered off about in 5 min after the last
switch operation. To exit from the auto-power-off mode, set the Range
Switch to “OFF” position once, and re-set it to the Range at which a
measurement to be conducted.
Fig. 30
Fig. 31
Fig. 32
Fig. 33