KYORITSU 4140 - Manual (Page 7)

̶ 5 ̶
List of Display Message
Battery symbol
Displayed when the measured values exceed the
displayable range.
(over-range)
e.g.Thedisplayshows“>1999Ω”ataLOOPtestwhen
atestresultexceeds1999Ω.
Displayedwhen“L-PEATTON”functionisselectedto
indicate ATT is on.
The LCD indicates “L-PE” when “L-PEATT ON” or
“ATTOFF”isselectedand“L-N/L-L”when“L-N/L-L”is
selected.
IndicatingwhatthevaluesdisplayedontheSubDisplay.
Temperature monitor for internal resistance, available
atLoop,PSC/PFCfunction.Furthermeasurementsare
suspended until the“
”symboldisappears.
Measuringsymbol(LOOPfunction)
L-N>20Ω Alert:Presenceof20ΩormorebetweenLine
‐Neutral at
ATT ON measurement
Caution:Presenceofnoiseinthecircuitundertest
during ATT measurement. ATT function should be
disabled to continue measurements.
nEHv
Caution:PresenceofhighvoltagebetweenNEUTRAL-
EARTH during ATT measurement. ATT function should
be disabled to continue measurements.
WiringcheckforLOOPfunction
DisplayedatPHASEROTATIONcheck
Correctphasesequence:displayed mark.
Reversed phase sequence : displayed
mark.
no
PHASE
ROTATION
Appears to indicate wrong connection
atPhaseRotationcheck.
LOOP
WhenontheLOOPfunction,supply
may have been interrupted.