Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 - Manual (Page 22)

19
5 M E AS U R E ME NT
This meter is capable of taking measurements with automatic or manual temperature
compensation. Automatic temperature compensation only occurs when a temperature sensor
is plugged into the meter. If there is no temperature sensor plugged into the meter, the default
manual temperature setting is automatically 25
°
C. You can manually set the temperature to
match your working conditions using a separate thermometer.
5.1 Automatic Temperature Compensation
For automatic temperature compensation (ATC) simply plug the built-in temperature sensor
probe into the meter. The ATC indicator will light up on the LCD (see figure 16).
Figure 16: Automatic Temperature Compensation
(ATC) indicator