Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 - Manual (Page 26)

23
1. Press the MR/ " once to recall the last data set.
NOTE: Memory Recall (MR) is only accessible in the MEAS mode. Press CAL/MEAS key
to return to the measurement mode.
2. Press the MR/ " key again to recall the next latest data set stored.
NOTE: Memory data is retained even if the power of the unit is switched off (even with
the batteries removed). Memory is erased when using Program 1.0 of SETUP (see
section 8.2.1).
6.3 Memory Clear
Under normal operating conditions, fresh data sets will automatically be stored at the expense
of data sets stored earlier. The instrument holds up to a maximum of 16 sets of data. The
meter also has a feature that enables easy but safe clearing of memory facilities. The process
to be followed in clearing the memory is outlined in SETUP (see section 8.2.1). The
accessibility of this function through the SETUP mode is to limit accidental clearing of memory
from the measurement mode.