System requirements, Loading cybercomm portable, Running cybercomm portable – Thermo Fisher Scientific CyberScan CON 10/CON 100/CON 200 User Manual
Page 41
38
9
CYBERCOMM POTRABLE - DATA ACQUISITION
SOFTWARE (DAS FOR CYBERSCAN CON 200
ONLY )
The CyberComm Portable software is designed for Eutech’s CyberScan pH 100 and Con 200
meters to allow you a convenient means of capturing data for future analysis using other
software program such as LOTUS 123, EXCEL or DBASE in Windows
©
. Often one finds it
cumbersome to record and transfer data from one media to another before the required
processing can be done. With the CyberComm Portable, this redundant processing can be
eliminated or reduced.
9.1 System
Requirements
To run the CyberComm Portable program, the following is required:
1.
PC - IBM Compatible XT and above with CD-ROM Drive
2.
EGA Monitor and above
3. Windows
©
Operating System ’95 and above
4.
Connecting communication RS232C cable
9.2
Loading CYBERCOMM PORTABLE
Figure 36: Insert Eutech Instruments' CD-ROM containing Data Acquisition Software
(DAS) into your CD-ROM drive and click on START button and RUN command.