West Control Solutions MRC 7000 Controller Manual - Manual (Page 31)

31
33 Pen Action on PAEC 0 or 1 1
Error Condition 0 = Pen goes to 0 % of chart
1 = Pen goes to 100 % of chart
Pressing the SCROLL key with the PAEC parameter value displayed in the Pen 1 window will
advance the display of a single pen instrument to the unit parameters. Pressing the SCROLL
key with the PAEC parameter displayed in the Pen 1 window of a two pen instrument will
advance the display to be PEns in the Pen 2 window. The Pen 2 Program mode parameter
selections can be made now. Pressing the SCROLL key with the PAEC parameter value
displayed in the Pen 2 window will cause the display to advance to the unit parameters
displayed in the Pen 1 window.
UNIT PARAMETERS
34 Relay A Assignment rLyA 0 to 8 0
1=Assigned to Alarm 1-Pen 1
2=Assigned to Alarm 2-Pen 1
3=Assigned to Alarm 1-Pen 2
4=Assigned to Alarm 2-Pen 2
5=Assigned to Output 1-Pen 1
6=Assigned to Output 2-Pen 1
7=Assigned to Output 1-Pen 2
8=Assigned to Output 2-Pen 2
35 Relay B Assignment rLyb Same selection as rLyA 0
36 Relay C Assignment rLyC Same selection as rLyA 0
37 Relay D Assignment rLyd Same selection as rLyA 0
38 Relay E Assignment rLyE Same selection as rLyA 0
39 Relay F Assignment rLyF Same selection as rLyA 0
40 Relay G Assignment rLyg Same selection as rLyA 0
41 Relay H Assignment rLyH Same selection as rLyA 0
42 Current Output A CurA 0 to 6 0
Assignment 0=Not Assigned
1=Assigned to Process
Value Output-Pen 1
2=Assigned to Process
Value Output-Pen 2
3=Assigned to Output 1-Pen 1
4=Assigned to Output 2-Pen 1
5=Assigned to Output1-Pen 2
6=Assigned to Output 2-Pen 2
43 Current Output B Curb Same selection as CurA 0
Assignment
44 Current Output C CurC Same selection as CurA 0
Assignment
45 Current Output D Curd Same selection as CurA 0
Assignment
46 Current Output A CoAr 0 to 1 1
Range 0=0-20 mA
1=4-20 mA
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODES SETTINGS SETTING SETTING