Input over-range or under-range, Sensor break, Changing an alarm value – West Control Solutions N8080 (for 2xxx) User Manual
Page 6
Advertising
1.3
INPUT OVER-RANGE OR UNDER-RANGE
If the input becomes over-range or under-range, the primary display will show:
The display will disappear when the input returns within the input scale range.
1.4
SENSOR BREAK
This indicates that there is a break in the input sensor circuit.
1.5
CHANGING AN ALARM VALUE
Alarm values cannot be edited if Alarm Lock is enabled (see Subsection 2.4).
1-3
Volume I
OM091-1
59136
Advertising