3 switching over by means of the enter key 19, 5 extended operating level 19, Extended operating level 19 – West Control Solutions TB 45 Temperature Limiter User Manual

Page 19: 3 switching over by means of the enter key, Extended operating level

Advertising
background image

5.4.3

Switching over by means of the Enter key

Various values can be called up on display line 2 by pressing the Enter key.

1

The value defined for display line 2 (via BlueControl

®

);

Basic setting is limit value LC.

2

Display of the error list, if it contains entries.
With several entries, the following value is displayed
when pressing the Enter key.

3

Display of extended operating level, if it contains
entries. With several entries, the following value is
displayed when pressing the Enter key.

4

Return to standard display
Unless a key is pressed during 30 s, the display returns to standard.

5.5

Extended operating level

The operation of important or frequently used parameters and signals can be allocated to the extended operating level.

This facilitates the access, e.g. travelling through long menu trees is omitted, or only selected values are operable, the
other data of the parameter level are e.g. disabled.

Display of the max. 8 available values of the extended operating level is in the second LCD line.

The content of the extended operating level is determined by means of the BlueControl

®

engineering tool. For this,

select entry "Operation level" in the "Mode" selection menu. Further information is given in the on-line help of the engi-
neering tool.

g

Value changing at the extended operating level is not possible with temperature limiter/monitor function
selected.

Press key ô to display the first value of the extended
operating level (after display of error list, if necessary).

The selected parameters can be changed by
pressing keys Ì and И .

ф press to display the next parameter

ô return to normal display after the last parameter

Unless a key is pressed within a defined time (timeout = 30
s), the operating level is displayed again.

g

Value changing at the extended operating level can be
disabled via

BlueControl

®

setting : Configuration /

Other / Iexo = 1 .

Operation

TB 45

Extended operating level

19

450.3

ыC

дььь

450.3

H.I

дььь

450.3

500.0

дььь

450.3

L.I

дььь

450.3

100.0

дььь

ф

ф

ф

1 2 TB E

278.3

450.0

äüä

1

2

1 2 TB E

278.3

FbF.1

д д

3

ф

ф

ф

1 2 TB E

278.3

L.1

дьдь

4

ф

1 2 TB E

278.3

450.0

дьд

ф

Advertising