General description, Unit identification, Introduction – Airedale Air Cooled Condensers R407C User Manual
Page 5
CONDENSERS
C11 - 45 / CS50 - 105
Condensers
5
Installation and Maintenance Manual: 6259642 V1.2.0 10/2013
General Description
UNIT IDENTIFICATION
AIR COOLED CONDENSER UNIT
C / CS
Condenser
11-105
Model Size (Expressed as Total Heat Rejection in kW)
HI
Head Pressure Control & Mains Isolator Fitted (C Condensers only)
H
Horizontal Air Discharge
V
Vertical Air Discharge
Example:
C45HI-H
CS50H-0
INTRODUCTION
This range of Air Cooled Condensers is available in 10 model sizes with heat of
rejection 11 - 105kW.
Custom designed for a small footprint, low sound level, slimline and aesthetically
pleasing appearance.
Available in either horizontal or vertical air discharge orientation,
please specify at order
.
Airedale has a comprehensive range of air cooled direct expansion indoor units
available to provide a matched system, please contact Airedale for further details.
All units are despatched following extensive leak and pressure testing and carry a
holding charge of inert gas.
The unit is designed for the use of R407C; please refer to
refrigerants.
CE Directive
Airedale certify that the equipment detailed in this manual conforms with the following
EC Directives:
Electromagnetic Compatibility Directive (EMC)
2004/108/EC
Low Voltage Directive (LVD)
2006/95/EC
Machinery Directive (MD)
89/392/EEC in the version
2006/42/EC
Pressure Equipment Directive (PED)
97/23/EC
To comply with these directives appropriate national & harmonised standards have
been applied. These are listed on the Declaration of Conformity, supplied with each
product.