Audient iD22 - Manual (Page 12)

19 20
Output Stage Block Diagram Software Features
Input Channels - Channel Types
The iD mixer application features three
types of input channels, these are colour
coded and are as follows:
• Analogue (Inputs 1+2) - BLUE
• Digital (S/PDIF or ADAT) - GREEN
• DAW Mixes (Playback 1-6) - PURPLE
Analogue input channels are taken
directly from the two ADC (insert returns,)
signals available here are; microphone, line,
D.I (channel two) or unity gain line input at
the return jack.
Digital inputs are provided as two
channels in S/PDIF mode and eight
channels in ADAT mode (four at > 48kHz).
DAW inputs are provided as three stereo
pairs and are designed as ‘virtual’ playback
channels from your DAW.
These can be monitored via the onboard
DSP mixer, routed to cue mixes or hard
assigned to DAC outputs.
Addressing outputs in your DAW will feed
signals into these channels. Therefore iD22
can sum all three signals together for
monitoring and access to cue mix buses.
Channel Naming Strip
Harking back to our large format console
heritage - the iD mixer application allows
you to label your channels via the editable
marker pen text on console tape!
MIC/LINE 1 or KICK for example