Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 14)

In this example, COM 5 is selected for
the ORION mobile transceiver
Result: The window closes and the COM
port you selected is displayed on the
Settings screen.
Figure 12: COM port on Settings screen
4 Repeat steps 2 and 3 to set the "IR COM PORT" for the IR programming cable if connected to the computer
When the COM ports are set, the software application is ready to use
OTEE: N The ORION SE/ME Firmware Updater stores technology connection information so it is good practice to use the same
USB port(s) on the laptop whenever you connect hardware to maintain the COM port settings
SETTINGS
Page 14 April 2014 ORION® SE/ME Firmware Updater