Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 19)

OTEE: N The number of ”Firmware Blocks“ in the message above the progress bar will vary depending on the
endpoint/encoder type
Next, the firmware update is validated.
Figure 16: Validating update
When the update process is complete, a message displays, stating the endpoint firmware is updated. The new firmware
version number is shown in the message.
OTEE: N The software application determines the new firmware version for the update based on the endpoint and
encoder type
Figure 17: IR firmware update complete
5 To update another endpoint, repeat steps 3 and 4
UPDATING ENDPOINT FIRMWARE
Page 19 April 2014 ORION® SE/ME Firmware Updater