Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 25
4 Click the Update button for an endpoint at the top of the list with a green bar in the RSSI field
OTEE:
N
Updates take place individually Multiple Update buttons cannot be selected simultaneously
Result: The screen information changes to show the update process:
•
The endpoint serial number and encoder type are identified.
•
The current firmware version is identified.
•
A progress bar displays as the firmware is updated.
OTEE:
N
You can click Cancel to stop the update of the selected endpoint and select another endpoint
Figure 28: RF firmware update in progress
•
The progress bar disappears, the firmware update is validated and a message confirms the endpoint has
been updated to the new firmware version. The updated endpoint is removed from the list as shown in the
example below.
Figure 29: RF firmware update complete
OTEE:
N
As each endpoint is updated, it is removed from the list and displayed on the Completed Updates screen
Refer to
"Completed Updates" on page 27
for more information
5 Repeat step 4 for each endpoint on the list in active communication with the software
OTEE:
N
If an endpoint fails to update after several attempts, reposition the vehicle and retry For additional help,
refer to
UPDATING ENDPOINT FIRMWARE
Page 25
April 2014
ORION®
SE/ME Firmware Updater