Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 11)

Trimble Ranger X Meter Reading System Software Installation
Removing Previous Software from Kiosk Mode
NOTE: N This procedure is only for handhelds in Kiosk mode
Operating the handheld in Kiosk mode, the main handheld screen appears as it does in Figure 9
Figure 9: Kiosk mode
To remove the previous software on a handheld in Kiosk mode, follow these steps
NOTE: N You can also remove Kiosk software by using the procedure "Removing Previous Software Using Factory Reset" on
page 7 However, if there is software on the handheld other than the ORION software that you do not want to
remove, use this procedure
1 Tap the screen to the right of the words "Badger
Trimble Ranger" in the title bar
Result: The Unlock button appears.
2 Tap the Unlock button
Figure 10: Tap Unlock button
REMOVING PREVIOUS SOFTWARE VERSIONS
Page 11 July 2013